Embroidery Supplies.com - Fast Frames Embroidery Hoops

FAST FRAMES Embroidery Hoops
Product Information: Please go to our Online Store to place your order and to see the full product line.
Click Here for Available Machine Types
Click Here for Fast Frames Instructions


Sew Where You Have Never Sewn Before

Fast Frames is a hoop less embroidery frame. Stick on backing is placed on the underside. The adhesive backing is exposed in the open sew space of the frame. Press the area to be sewn firmly down on the backing (using the notches as line up points for alignment). Any area that will lay down flat in the sew field you can sew. Rotation of the design may be needed(back arch of a cap for example) Use it for sweat band area of caps, back, sides, bill, bucket caps, collar tips, cuffs of sleeves, dog collars, gym bag center flaps, etc. .. Sport knits do not get stretched out of shape. The stick on backing holds it in place. This is a much faster cost effective way of sewing hard to sew items. Don't worry you won't waste a lot of backing. When you tear the item away you just place a patch on the hole from the underside and press the next item in place to sew.



When ordering you will be asked to measure your existing hoop width. The picture above is how you should measure your hoop! This is how we determine the width of the Fast Frame or X-Change..

Original Fast Frames

Basic 7" x 3" & 4" x 2"	$84.00	The BASIC has two sew areas in one on this model. You are able to sew on cap sides, backs, bills and just about anyplace you can stick down flat. It also works very well on bucket hats, cuffs of sleeves, collar tips, tops of gym bags, turtle necks, some bag pockets and a lot more.





Pockets 2" x 4" 2.5" x 4" 3" x 4" 4" x 4"	$84.00	The POCKET frame was designed to sew on pockets that have stretch to them, like jersey and knits. This frame is also very good for sewing on CD cases, socks, gloves, long sleeve shirt cuffs, small items such as doll hats.






Computer Bags 5" x 4" 7" x 5"	$84.00	The 5"x4" & 7"x5" COMPUTER CASE frame was designed for sew on many different types of lap top cases. It also works very well on apron pockets, Christmas socks with 7 1/2" or larger opening, canvas bags, book bags and much more.





Deep Bags 7" x 8"	$84.00	The 7"x8" DEEP BAG frame was designed for sew on many different types of lap top cases. It also works very well on canvas bags, book bags and much more.




Mediums 6.5" x 9" 6.5" x 10" 6.5" x 10.5" 6.5" x 11"	$84.00	The MEDIUM FORMATS have sew areas of 6 1/2" tall by 9" , 10", 10.5", and 11" wide. The type of machine you have will dictate the size of frame you can use. This frame was designed for sewing panel programs, dog collars, ties, aprons, tops of double zippered gym bags. Tajima-Brother-Toyota -SWF 6 1/2" by 9" or 6 1/2" by 10 1/2" Melco EMT 6 1/2" by 11"







Medium Tall 12" x 10.5" 12" x 11"	$84.00	The MEDIUM TALL FORMATS have sew areas of 12" tall by 10.5",11" wide. The type of machine you have will dictate the size of frame you can use. This frame was designed for sewing panel programs, dog collars, ties, aprons, tops of double zippered gym bags. Tajima-Brother-Toyota -SWF 6 1/2" by 9" or 6 1/2" by 10 1/2" Melco EMT 6 1/2" by 11"







Large 6.5" x 9" 6.5" x 10" 6.5" x 12" 6.5" x 14.4" 6.5" x 18"	$84.00	The LARGE FORMATS have sew areas of 6 1/2" tall by 9 ", 10", 12", 14.4", or 18" wide. The type of machine you have will dictate the size of frame you can use. This frame was designed for sewing panel programs, dog collars, ties, aprons, tops of double zippered gym bags. Tajima / SWF/ Toyota 6 1/2" by 14 1/2". Brother 6 1/2" by 18". Barudan 520 6 1/2" by 14 " Melco EMC 6 1/2" by 12"









Jumbo 12" x 14" 12" x 14.5" 12" x 18"	$128.00	Tajima-Brother-Toyota -SWF 14 1/2" by 12" Brother 18" by 12" Barudan 520 14"" by 12" EMB 14 1/2" by 12"






Sleeves 2" x 11" 3" x 11" 4.5" x 11"	$128.00	The SLEEVE FRAME original design of 3" x 11" , 2" x 11" and the 41/2" x 11". This frames is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes).






Military Name Tape	$298.00	Not Stocked For All Machine Types



Dog Collar / Belt	$280.00	Not Stocked For All Machine Types



7 in 1 X-Change			$329.00



THIS SET COMES WITH: THE ARM FOR YOUR MACHINE TYPE 2 X 4 MONO HOOP 2.5 X 4 POCKET HOOP 3 X 4 POCKET HOOP 5 X 4 CHRISTMAS STOCKING HOOP 6” RADIUS HAT HOOP FOR SIDES AND BACKS OF HATS 7 X 5 ATTACHÉ CASE HOOP 4 ½ X 11 SLEEVE HOOP



X-Change Optional Add-on Sizes			$40.00 Ea $45.00 & up on Large Sizes

1.5" x 4" Glove Frame 2" x 4" Glove Frame		This hoop is necked down to give room for your bobbin arm when sewing gloves .

1.5" x 4" Dress Shirt Pocket		1/2" smaller than the mono designed to sew gloves, small bags with pouches, or pockets

2.5" x 7" Sock Frame		Low profile caps. this hoop is designed for sewing on athletic socks and wine cases.

4" x 4" Pocket		Designed to maximize the sew field in items such as a Christmas stocking, apron pockets, etc. ..

3.5" x 6" LT Bag Frame		Reach a little deeper into a bag, such as a boat bag, back packs, etc. ..

4.5" x 7" Bag Frame		This one is a wider wall for more stability on heavier items. Good for back packs, leather type materials, even some short sleeves.

11" x 7" Deep Bag		Designed for golf bags with a sturdy design for heavy items like suit cases, back packs, quilting, etc. ..

2" x 4" Mono Full Radius		Designed for stretch gloves and other small items. Children's and infant's items such as caps, etc. ..

3" x 4" Pocket Full Radius		Designed for infant and toddler caps.

6" Full Radius Low Profile		Low profile caps

2.5" x 11" Sock Frame		This is for the 7 in 1 X-Change Only. A shorter one is available for the 6 in 1 X-change

X-Change Arm Only			$130.00



PR600 & Baby Lock Pro 7 in 1LT X-Change			$329.00



THIS SET COMES WITH: THE ARM FOR YOUR MACHINE TYPE 2 X 4 MONO HOOP 2.5 X 4 POCKET HOOP 3 X 4 POCKET HOOP 5 X 4 CHRISTMAS STOCKING HOOP 6” RADIUS HAT HOOP FOR SIDES AND BACKS OF HATS 7" X 5"ATTACHÉ CASE HOOP 7"X 7 " Deep Bag HOOP

Note: The new 7 in 1 you don't have to move you left arm of your machine at all. Just slide the right arm out to the large hoop size and it will read all FAST FRAMES hoop sizes.

Just trace design in blank hoop to see that it clears hoop then add item and sew.

The only single Fast Frames that will fit the PR600 or Babylock are: Basic Jumbo Dog Collar Name Tape



PR600 & Baby Lock Pro Jumbo			$128.00



Sewing Field 10" wide x 14" tall. Design will need to be split!!!!!
Sew 10" x 7" take hoop out, turn it around pickup where you left off, sew other half of design.

PR600 & Baby Lock Pro Sleeve			$116.50

4.5" x 8" Sleeve

PR600 & Baby Lock Travel Case			$495.00



The Travel Case is great for transporting your machine to fairs and shows. Made of high impact ABS plastic, this case has a telescoping handle and wheels so you can pull your machine where you need to go. It has a strap and foot impressions inside to hold your machine secure. When you arrive at your destination just put your case up on a table, remove the top, plug in your machine and you are ready to sew. (Machine must be removed from case to use the cap driver)

This item will have additional shipping charges added when shipped. This is due to the item being oversized. (Aprox. $90-$100 total shipping for ground service)

PR600 & Baby Lock Table Top			$349.00



The Table Top is for those heavy items you sew that need to be supported from below. Great for quilting, towels, blankets, horse blankets, Carharts, jackets and other items that are not sewn tubular. Made from sturdy polyethylene, its lightweight and easy to attach and remove from your machine. Our table top works even when using the new Travel Case

This item will have additional shipping charges added when shipped other then ground. This is due to the item being oversized.