EmbroiderySupplies.com
HomepageShop OnlineTerms & ConditionsFeedback FormNewsContact Us
Embroidery Supplies.com

Home > Clamping Systems > ICTCS 3

 
 

ICTCS 3 Embroidery Clamping Systems By EMS HoopTech

 
 
Product Information: Please go to our Online Store to place your order.
 
 
EMS HoopTech Clamping System ICTCS 3
 
 
ICTCS3 - 13.0 x 9.0
 
$599.95
 
     
 

The “ICTCS Interchangeable Tubular Clamping System. The original clamping system with changeable window sizes.

All of the ICTCS Clamps use a spring loaded clamping chassis to hold interchangeable upper and lower clamping windows. These windows clamp the fabric and backing between the upper and lower windows and hold the fabric in position during sewing. The ICTCS chassis/window assembly attaches to the embroidery machine using the same tubular arms that support regular plastic embroidery hoops. Adapter arm styles are available for nearly all major industrial embroidery machine manufacturers and machine types. If you are currently using plastic hoops, then chances are that we have an ICTCS clamp that fits your machine *.

Each size ICTCS Clamping System (1-2-3) has a number of window sizes available that are exclusive to each size clamp. These window sets, (upper & lower) are easily and quickly changed without any tools. Loosening a single knob releases the bottom window from the chassis base, and the top window is released from the clamp top pins by gently spreading the support arms. The changeover takes less that a minute.

The ICTCS-1 has 6 available window sizes. 3 rectangular windows and 3 windows designed for sewing on the sides and back of caps. The largest window for the ICTCS-1 is 4.5 x 4.5”.

The ICTCS-2 has 7 available window sizes. 6 rectangular/square and 1 round, (that can also be used to sew the back of caps). The largest window for the ICTCS-2 is 7.5 x 6.0”

* The ICTCS-3 has a single window size of 13“ x 9”. Due to its large size the ICTCS-3 Clamp unlike the ICTCS-1 & 2 is a drive rail mounted clamp and cannot be attached using tubular arms. It is attached directly to the machine drive bar.

 

The ICTCS 3 is the larger version of a spring loaded clamping device with inter-changeable windows.  However, at this time we only have the largest window available.  The window size is 13" x 9".

The ICTCS 3  is a direct drive rail mounted interface, because of the size it can not be set up in the tubular mode and is best used as a table top model.

The ICTCS 3 is ideal for larger embroidery designs. The larger windows allow you to do designs that are currently difficult.  You will be able to do beach towels, entry rugs, bath mats, car mats, shower curtains, etc.

 

This Clamping System can only be used on the single head stretch machines. (Not Multi head). Barudan, SWF, Melco, Brother,  & Tajima

 
     
 
Please call or email us so we can verify your machine before purchase.
 
     
 
Click link below for information on available sizes
 
     
   
     
 
Click here for ICTCS applications
 
 
Click here for ICTCS Clamp Instructions
 
 
Click here for Slim Line Clamp Instructions
 
 
Click here for the ICTCS review By R & M Crafts
 
     
 
EMS HOOP TECH PRODUCT RETURNS ARE ONLY ACCEPTED IF MANUFACTURER DEFECTS AND RETURNED WITHIN 14 DAYS FOR EXCHANGE ONLY. *NO EXCEPTIONS*
 
Embroidery Supplies - American ExpressEmbroidery Supplies - DiscoverEmbroidery Supplies - Master CardEmbroidery Supplies - VisaEmbroidery Supplies - Pay PalEmbroidery Supplies - E Check
 

Home - Shop Online - Terms & Conditions - Feedback - News/Links - Contact Us

Backing - Bobbins - Cap Frames - Clamping Systems - Hooping Equipment - Hoops - Needles - Scissors- Software - Supplies - Thread - Wearables

Links - Email - Site Map - Embroidery Supply Catalog - Specials - Return To Top

 
© 2005 - 2010 EmbroiderySupplies.com, LLC - All Rights Reserved