HomepageShop OnlineTerms & ConditionsFeedback FormNewsContact Us
Embroidery Supplies.com

Home > Clamping Systems > ICTCS 1


ICTCS 1 Embroidery Clamping Systems By EMS HoopTech

Product Information: Please go to our Online Store to place your order.
ICTCS 1 Clamping System
click image for larger view
599254 5" Base w/Adapter Arms $185.00

** Recommended for Multi-Head Embroidery Machines**

The “ICTCS Interchangeable Tubular Clamping System. The original clamping system with changeable window sizes.


All of the ICTCS Clamps use a spring loaded clamping chassis to hold interchangeable upper and lower clamping windows. These windows clamp the fabric and backing between the upper and lower windows and hold the fabric in position during sewing. The ICTCS chassis/window assembly attaches to the embroidery machine using the same tubular arms that support regular plastic embroidery hoops. Adapter arm styles are available for nearly all major industrial embroidery machine manufacturers and machine types. If you are currently using plastic hoops, then chances are that we have an ICTCS clamp that fits your machine *.


Each size ICTCS Clamping System (1-2-3) has a number of window sizes available that are exclusive to each size clamp. These window sets, (upper & lower) are easily and quickly changed without any tools. Loosening a single knob releases the bottom window from the chassis base, and the top window is released from the clamp top pins by gently spreading the support arms. The changeover takes less that a minute.


The ICTCS-1 has 6 available window sizes. 3 rectangular windows and 3 windows designed for sewing on the sides and back of caps. The largest window for the ICTCS-1 is 4.5 x 4.5”.


The ICTCS-2 has 7 available window sizes. 6 rectangular/square and 1 round, (that can also be used to sew the back of caps). The largest window for the ICTCS-2 is 7.5 x 6.0”


* The ICTCS-3 has a single window size of 13“ x 9”. Due to its large size the ICTCS-3 Clamp unlike the ICTCS-1 & 2 is a drive rail mounted clamp and cannot be attached using tubular arms. It is attached directly to the machine drive bar.



The ICTCS 1 is a spring loaded clamping device with inter-changeable windows.The ICTCS 1 fits on your embroidery machine the same as a plastic hoop.  Once installed, all you do is open the clamping window by rotating the handle down. Insert what you want to sew and release the clamp.

The ICTCS 1 is ideal for smaller embroidery designs. The smaller windows fit into the pockets of tote bags, computer cases and back packs. The (3) specially designed cap windows allow for sewing on the sides and back of caps. 

Six window sizes are currently available

2.5 x 4.0 - 3.5 x 4.0 - 4.5 x 4.5 - Back of Cap - Left Side of Cap - Right Side of Cap

P1599255 - 2.5 x 4.0   $96.45
P2599256 - 3.5 x 4.0  $96.45
P3599295 - 4.5 x 4.5  $96.45
HB599257 - Cap Back  $65.45
HL599294 - Cap Left  $65.45
HR599293 - Cap Right  $65.45
HoopTech ICTCS full Set With All Six Windows
ICTCS 1 Window Sizes
Click image for details on windows sets
Hoop Width
When ordering you will be asked to measure your existing hoop width. The picture above is how you should measure your hoop! This is how we determine which metal to install on the clamping systems.
Click link below for information on available sizes
Click here for ICTCS applications
Click here for ICTCS Clamp Instructions
Click here for Slim Line Clamp Instructions
Click here for the ICTCS review By R & M Crafts
Embroidery Supplies - American ExpressEmbroidery Supplies - DiscoverEmbroidery Supplies - Master CardEmbroidery Supplies - VisaEmbroidery Supplies - Pay PalEmbroidery Supplies - E Check

Home - Shop Online - Terms & Conditions - Feedback - News/Links - Contact Us

Backing - Bobbins - Cap Frames - Clamping Systems - Hooping Equipment - Hoops - Needles - Scissors- Software - Supplies - Thread - Wearables

Links - Email - Site Map - Embroidery Supply Catalog - Specials - Return To Top

© 2005 - 2010 EmbroiderySupplies.com, LLC - All Rights Reserved