|
|
|
GREEN "270"
TAJIMA - BROTHER - PRODIGY - MELCO - TOYOTA - RICOMA
|
ORIGINAL "BLUE"
OLDER - TAJIMA - BROTHER - MELCO - TOYOTA- HAPPY
|
|
8092 - $206.50 |
8089 - $206.50
|
80121 - $206.50 |
|
|
|
LIGHT BLUE "270-290"
HAPPY MACHINES
|
|
ORANGE BUCKET FRAME
"270" DRIVERS |
8098 - $206.50 |
599181 - $206.50 |
599369 - $206.50 |
|
|
Picture N/A |
GOLD "270" - GREAT NOTIONS
|
Cap Frame for Back of Caps
|
GREEN "270"
MELCO
(Was originally Black) |
599270 - $206.50 |
599169 - $206.50 |
80112 - $206.50 |
| |
|
|
"270" refers to the ability of you embroidery machine to sew on the sides of the cap. most OEM "270" cap frames are full circle.This means your cap driver will rotate "270" degrees (some refer to this as "290" also). If you machine does not have the ability to sew on the sides of the cap then you have an older standard cap frame and will take the original"BLUE" cap frame. |
| |
|
|
The EMS/HOOP TECH cap frames remain the industry standard for quality cap embroidery. Preferred & recommended by operators and technicians as the best solution for cap sewing problems. Available for major embroidery machines.
|
|
| |
|
|
|
In just few short years the patented EMS / HOOP TECH style cap frame has become the industry leader for quality cap sewing. There's no tighter grip in the industry. The three point clamping design ensures that the front of the cap stays put...even on large designs .Sewing on the popular "low profile un-constructed " caps is the challenge for today's embroiders, but the design of the EMS / HOOP TECH cap frame locks it into place. |
|
|
The EMS / HOOP TECH Cap Frames are built tough to stand up to day to day production use. The heavy gauge stainless steel construction will give you years of service. - The EMS / HOOP TECH Cap Frame Design allows for variation in cap size, shape and material thickness. |
|
| |
|
| |
|
|
|
| |
|
| |
|
|
|
| |
|
| |
|
|
|
Standard or 270 Framing Gauge
|
|
Framing Gauge Table Assembly |
8095 - $252.45 |
|
599226 - $306.45 |
| |
|
|
The patented HOOP TECH Framing Gauge features the exclusive T–Bar Tensioning Arm. This tensioning arm gives even the inexperienced cap framer the ability to frame a cap tight…even low profile un-constructed caps. It’s the easiest way to stretch a cap tight! Once you try it, you’ll be amazed at how easy it can be to frame a cap! |
|
|
The EMS/HOOP TECH
CAP FRAMING STAND
is a stand alone work station designed specifically for framing caps.
The stand features:
- Adjustable working height
- 6.7 sq/ft of shelf space
- Heavy duty powder coated steel construction
- Leveling feet
- And it takes up only 4 sq/ft of floor space
Keep all of your framing needs in one place ...ready to use.The Framing Gauge mounting bar easily adjusts to the proper working height for all sizes of operators. Working at the "right" height helps to ensure consistent framing and reduces sore muscles and operator fatigue. |
|
| |
|
|
P&F Cap Press - $695.00 |
|
|
| |
|
|
|
|
This new press can be an option for shops that are still having trouble stretching caps by hand. By taking the stress of pulling a cap by hand off of the operator, this press does all the hard work by the use of a foot pedal stretching assembly. Also by stretching with your foot this allows the use of the operators hands for placement, adjusting, and clamping the cap frame. This press can work with all standard OEM (not 270) cap frames and gauges.The 270 cap frames are full circle and do not allow access to the back of the cap. For the best benefit we recommend using the EMS HoopTech Cap Frames and gauge
.
There are two major problems when sewing cap:
-
Stretching the cap - This is resolved and made easy by using the Cap Press .
-
Holding the cap tight in the frame - This is done by using the patented HoopTech Cap Frame
The Compact Cap Press comes complete with a gauge for the HoopTech Cap Frames installed. Please call or email us with any questions. |
|
| |
|
|
| |
|
|
EMS HOOP TECH PRODUCT RETURNS ARE ONLY ACCEPTED IF MANUFACTURER DEFECTS AND RETURNED WITHIN 14 DAYS FOR EXCHANGE ONLY. *NO EXCEPTIONS* |
| |
|
|
